www.deadharddrive.com

architeuthis666 · Officially active! Joined: 06 Feb 2010 Posts: 4

Trying to resurrect a WD Caviar SE16 500GB. Nothing too important on there but I figured it's worth a try. I assume the board died although there is no visible damage -- there were never any odd noises from the drive and it seems to still spin up normally.

Model: WD5000AAKS-00YGA0
Date: 26 SEP 2007
DCM: DARNNT2CAB
Number on PCB label: 2061-701477-900 AB

I don't know exactly how similar the DCM has to be in order for it to work, if that has been discussed please point it out to me (in the meantime I will keep digging through old posts).

sunnydreamspace · Deadharddrive regular +5 Joined: 04 Jan 2009 Posts: 540

hi,
please contact me by email. and let me know more detail. it's seems no the PCB problem.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace

Eric Lee · Posted: Sun Feb 07, 2010 2:52 pm Post subject:

Hi,

We have this working PCB in stock, but rom is in the main chip, pls contact my hotmail for more details.

Thanks
Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail：eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype：eric.lee1984

harddrivespecialist · Posted: Sun Feb 07, 2010 9:45 pm Post subject:

If your drive spins up, your PCB should be fine.
You have problems inside hdd.
_________________
www.datarecoveryne.com

sunnydreamspace · Deadharddrive regular +5 Joined: 04 Jan 2009 Posts: 540

yeah. it may firmware problem. even head. i can handle everything.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace