| View previous topic :: View next topic |
| Author |
Message |
CDobby
Officially active!
Joined: 26 Dec 2007
Posts: 2
|
 Posted: Thu Dec 27, 2007 2:51 am Post subject: Help!!!!! Seagate ST3500641A Firmware 3.AAJ P/N 9BD048-560 |
 |
|
I have a problem. I use Mac OX.10.4 and I have an external Hard Drive that has stopped working or Powering up. I have found that my original Drive has a bad Logic Board. So I find this obscure place in Texas and Low and behold they have the Identical Model # and Firmware. However the Date code is different and the Site Code is the same. Now prior to this my Hard-dive is dead a a Door knob with Noooo spining or sound.
So I take the logic board out of the identical drive and place it on the original hard drive and it Spins and is making a sound boots up. I jump up and down with excitement!!!
I then go to my mac CPU and create a folder to dump this info into so that I back it up more.
With firewire connected I turn on the CPU however the new drive is not being seen(Recognized). I restart.. to no avail... I connect it to a windows CPU as says that there is a removable disk present but properties says no size amount.
Is there a way to bypass the malfuctioning part of the Logic Board just so I can transfer the data?
_________________
We All Need Help Sometimes!!!!!!!!!!!!!!
Last edited by CDobby on Fri Jan 11, 2008 2:34 am; edited 1 time in total |
|
| Back to top |
|
 |
|
|
CDobby
Officially active!
Joined: 26 Dec 2007
Posts: 2
|
| Posted: Mon Dec 31, 2007 1:56 pm Post subject: |
|
|
Does anyone have a solution?
_________________
We All Need Help Sometimes!!!!!!!!!!!!!! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
