| View previous topic :: View next topic |
| Author |
Message |
PMCSEZE
Active contributor
Joined: 06 Mar 2008
Posts: 6
|
 Posted: Thu Mar 06, 2008 5:11 am Post subject: Can't find, Please Help: WD5000KS - 00MNB0 |
 |
|
WD P/N: WD5000KS - 00MNB0
Date: 15 MAR 2006
DCM: HCHCAJAA
WWN: 50014EE0000050E9
PCB Stamp: 2060-701383-001 Rev A
Sticker: 2061-701383-E00 AC XW 3H11 1U6F 1 007360 6367 (not sure why this differs from the PCB Stamp) |
|
| Back to top |
|
 |
|
|
Arkadas
Deadharddrive regular +1
Joined: 25 Nov 2006
Posts: 28
Location: istanbul
|
| Posted: Tue Mar 11, 2008 4:29 pm Post subject: do you need room ? i have it ROM |
|
|
i have about it ROM...if you have Salvationdata Equipment ..i have MODUL too
_________________
Arkadas Bilgisayar
Data Recovery Service TURKEY
http://www.datakurtarma.com |
|
| Back to top |
|
|
PMCSEZE
Active contributor
Joined: 06 Mar 2008
Posts: 6
|
| Posted: Tue Mar 11, 2008 4:31 pm Post subject: Re: do you need room ? i have it ROM |
|
|
| Arkadas wrote: | | i have about it ROM...if you have Salvationdata Equipment ..i have MODUL too |
I have no idea what you just said. Can you clarify? |
|
| Back to top |
|
|
Arkadas
Deadharddrive regular +1
Joined: 25 Nov 2006
Posts: 28
Location: istanbul
|
| Posted: Tue Mar 11, 2008 5:57 pm Post subject: where are you from ? |
|
|
where are you from and how do you want to recovery your DATA ?
which Equipment do you have for Recovery your Data?
_________________
Arkadas Bilgisayar
Data Recovery Service TURKEY
http://www.datakurtarma.com |
|
| Back to top |
|
|
PMCSEZE
Active contributor
Joined: 06 Mar 2008
Posts: 6
|
| Posted: Tue Mar 11, 2008 6:01 pm Post subject: |
|
|
| I'm located in the Los Angeles area. What I want to do is find an identical circuit board, replace the existing one, get the drive to be recognized by BIOS and copy the data off onto another drive. We've done this in the past to drives and it has worked many times. However, we don't have any data recovery hardware. Is there affordable hardware we should be looking at? |
|
| Back to top |
|
|
Arkadas
Deadharddrive regular +1
Joined: 25 Nov 2006
Posts: 28
Location: istanbul
|
|
| Back to top |
|
|
PMCSEZE
Active contributor
Joined: 06 Mar 2008
Posts: 6
|
| Posted: Tue Mar 11, 2008 6:25 pm Post subject: Re: if you need PCB |
|
|
Will this see a drive that BIOS won't see? |
|
| Back to top |
|
|
Arkadas
Deadharddrive regular +1
Joined: 25 Nov 2006
Posts: 28
Location: istanbul
|
|
| Back to top |
|
|
PMCSEZE
Active contributor
Joined: 06 Mar 2008
Posts: 6
|
| Posted: Fri Mar 14, 2008 7:20 pm Post subject: |
|
|
| That isn't the PCB that I have. It's my understanding that I need the exact same PCB down to firmware and possibly even mfg date. Is that correct? |
|
| Back to top |
|
|
PMCSEZE
Active contributor
Joined: 06 Mar 2008
Posts: 6
|
| Posted: Tue Mar 18, 2008 7:59 pm Post subject: |
|
|
| So if I get salvation data, I can pick up a similar PCB, flash it with the firmware that you have for my HD, and then BIOS should be able to see my HD? |
|
| Back to top |
|
|
leon2046
Deadharddrive regular +1
Joined: 27 Aug 2010
Posts: 29
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
[/url]