www.deadharddrive.com
Deadharddrive forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Seagate Barracuda 320GB ST3320620A:firmware 3.AAE
Goto page 1, 2, 3, 4  Next
 
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> Hard drives wanted
View previous topic :: View next topic  
Author Message
mav6932
Posted once


Joined: 05 Aug 2007
Posts: 1

PostPosted: Mon Aug 06, 2007 3:12 am    Post subject: Seagate Barracuda 320GB ST3320620A:firmware 3.AAE Reply with quote

Let me first start my first post by saying wow, this site is amazing.

I have a Seagate Barracuda 7200.10 320Gig Harddrive that is not working. I think the board is at fault. It might be a faulty Capacitor (ST Micorelectronics BUX C641), but I cannot find any information or a replacement on the net. I was wondering if any of you guys might have a board I can use.

The specs are

Seagate Barracuda 7200.10 320GB
ST3320620A
Fimware:3.AAE
Site code: WU


Please contact me if you have a board I can buy
Thanks
Back to top
View user's profile Send private message
Chris_m
Officially active!


Joined: 28 Aug 2007
Posts: 2

PostPosted: Tue Aug 28, 2007 9:46 am    Post subject: Reply with quote

Hey man, may be I could help you. I can get a

Seagate Barracuda 7200.10 320GB
ST3320620A
Fimware:3.AAE

I don't know anything about the site code. Is that number important?

You can reach me at

chris.p.marcel@gmail.com

I live in The Netherlands.

Greetings,

Christian

PS: I am looking the same drive but with firmware 3.AAC, could you help me with that?
Back to top
View user's profile Send private message
golfer1
Officially active!


Joined: 05 Sep 2007
Posts: 2

PostPosted: Wed Sep 05, 2007 1:35 pm    Post subject: Reply with quote

Chris_m wrote:
Hey man, may be I could help you. I can get a

Seagate Barracuda 7200.10 320GB
ST3320620A
Fimware:3.AAE

I don't know anything about the site code. Is that number important?

You can reach me at

chris.p.marcel@gmail.com

I live in The Netherlands.

Greetings,

Christian

PS: I am looking the same drive but with firmware 3.AAC, could you help me with that?


Hey, would it be possible for you to check the Chipset on that board?

I need one with the ST Chipset rather than the Agere.

If so, I am very interested.
Back to top
View user's profile Send private message
dmshep
Active contributor


Joined: 09 Sep 2007
Posts: 5

PostPosted: Mon Sep 10, 2007 4:58 am    Post subject: Reply with quote

I'm looking for exactly this PCB as well, same specs, but with the Agere chipset. If golfer hasn't taken it, I'm big time interested.
Back to top
View user's profile Send private message
rhagerty
Deadharddrive regular


Joined: 31 Jan 2008
Posts: 11

PostPosted: Thu Jan 31, 2008 3:10 am    Post subject: Reply with quote

I'm in the same boat. Anyone got the board?
Back to top
View user's profile Send private message Send e-mail
rhagerty
Deadharddrive regular


Joined: 31 Jan 2008
Posts: 11

PostPosted: Sun Feb 03, 2008 3:16 pm    Post subject: seagate success Reply with quote

I just did a straight swap of ST3320620A, Firmware: 3.AAE, S/N 9QF4, Site Code: TK, P/N 9BJ04G for ST303204N1A1A-RK , Firmware: 3.AAE, S/N 9QF6DD5K, Site Code: TK, P/N 9BJ0A4 (note the multiple differences) and it worked flawlessly. No ROM chip exchange needed.
Back to top
View user's profile Send private message Send e-mail
bucheron_59
Deadharddrive regular +3


Joined: 05 Sep 2007
Posts: 111
Location: Cambrai, FRANCE

PostPosted: Sun Feb 10, 2008 2:23 am    Post subject: Reply with quote

Hello, can you scan your pcb (back and front) and sent it by email thanks.
_________________
http://www.ledisquedur.com
mail : bucheron_59@hotmail.com
Back to top
View user's profile Send private message Send e-mail MSN Messenger
elchmaen
Officially active!


Joined: 18 Mar 2008
Posts: 3

PostPosted: Tue Mar 18, 2008 8:29 am    Post subject: Reply with quote

Hello folks,

I have a problem with my ST3320620A and after reading this great board I want to give the PCB swap a try.
So is this PCB for ST3320620A FW:3.AAE SC: TK still available? I am willing to buy it and if necessary resell it afterwards.
I am also in the Netherlands but shipping to Germany is not a big problem.

Oh, my problem: I placed this Seagate in an IcyBox and now it starts to click when trying to access it, blocking the IDE bus. Motor spins up.
Starting without IDE connected works fine, motor spins up.
I had the same prob with another Seagate in that IcyBox.
An IcyBox is an external USB/FireWire housing.

Thanks for any help in advance,
René
Back to top
View user's profile Send private message
cheadledatarecovery1
Deadharddrive regular +1


Joined: 22 Feb 2008
Posts: 33

PostPosted: Wed Apr 09, 2008 9:37 am    Post subject: I have... Reply with quote

Have you had any luck finding one? In front of me I have the following which I can offer:
ST3320620A
P/N: 9BJ04G-305
3.AAE
Site: WU (although this shouldn't make a difference)

I have just used this myself for a PCB swap to get a similar drive working.
Contact me asap as this drive is meant ot be picked up by a customer of mine on Thursday/Friday, but I can always go and get them a new disk.

All the best,
John
Back to top
View user's profile Send private message
furogato
Officially active!


Joined: 09 Apr 2008
Posts: 2
Location: Houston, TX USA

PostPosted: Wed Apr 09, 2008 9:59 pm    Post subject: Reply with quote

What are the chances that the PCB for a 320Gb SATA

Model: ST3320620A
P/N: 9BJ04G-305
Firmware: 3.AAE


would work on a 300Gb SATA with similar specs?

Model: ST3300620AS
P/N: 9BJ143-305
Firmware: 3.AAE


The chipset on my burnt PCB says Agere. I posted a new thread for the 300Gb PCB and then saw that the numbers are almost the same.

Here's a photo of my burnt ST3300620AS PCB




Thanks
Mike

Also, www.newegg.com has the ST3320620AS in stock. http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140[/img]
Back to top
View user's profile Send private message AIM Address
cheadledatarecovery1
Deadharddrive regular +1


Joined: 22 Feb 2008
Posts: 33

PostPosted: Wed Apr 09, 2008 11:11 pm    Post subject: Reply with quote

Furogato - The chances of my board getting your drive working are absolutely zero. The part number is still very important and in this case will cause a conflict, primarily because my drive is a PATA connection and yours is a SATA.

Also to 'Elchmaen' the clicking noise you can hear is not going to be fixed by a PCB exchange. If it is a repetitive clicking sound and your HDD does not detect in the BIOS the likely causes are head crash, faulty firmware (v. frequent in Western Digital Drives) or pre-amplifier fault. None of which can be fixed by a straight PCB swap.

Faulty or corrupt firmware must be manipulated by a machine like the PC-3000.

I hope this all helps!
visit me at...
www.cheadledatarecovery.co.uk

All the best,
John
Back to top
View user's profile Send private message
elchmaen
Officially active!


Joined: 18 Mar 2008
Posts: 3

PostPosted: Thu Apr 10, 2008 7:42 am    Post subject: Reply with quote

Hi John,

how much would a diagnosis and a possible firmware reflash cost? I assume you read my other post. If not, the clicking noise appeared right after installing it into an IcyBox. It happened also to a ST3500630A.

But a ST3250620A works fine in that IcyBox. And other drives, too.

BTW, if the PCB swap does not help there is no sense in buying your drive, is there?

Kind regards
René
Back to top
View user's profile Send private message
Arkadas
Deadharddrive regular +1


Joined: 25 Nov 2006
Posts: 28
Location: istanbul

PostPosted: Thu Apr 10, 2008 9:35 am    Post subject: Reply with quote



_________________
Arkadas Bilgisayar
Data Recovery Service TURKEY

http://www.datakurtarma.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
cheadledatarecovery1
Deadharddrive regular +1


Joined: 22 Feb 2008
Posts: 33

PostPosted: Thu Apr 10, 2008 9:43 am    Post subject: Reply with quote

Yes that's right buying the PCB from me is unlikely to solve your problem. Although I have my own data recovery company I'm not here to profiteer as I myself find these forums a useful place to share knowledge (and parts).

With regard to what you sent me in a private message (I hope you don't mind me posting it):

"Yes, drive spins up. As long as there is no access attempt via the IDE interface or no IDE cable attached it just spins and remains silent.

Sometimes it is detected by the BIOS, sometimes not.
A USB-to-IDE adapter also causes the drive to click the moment the OS (W2K) tries to identify/access the drive and tries to mount it. "Identification" works, ie. in the removable drives window there is a USB drive which is labelled as ST3320630A. This is where the procedure stops. The drive blocks the IDE interface (or here USB) and clicks and after some time spins down."

Some help and advice.
1) First off forget about trying to connect it through a usb interface. You add a whole layer of software & interfacing devices by trying to access your HDD as a mass storage device in windows. It will just make life more difficult.

2) I've had a few disks in that sometimes detect in the bios and sometimes don't. Usually this is typical of a drives read/write capabilities starting to fail. This can be caused by a number of faults including heads that are becoming worn or misaligned.

3) About the clicking noise you get when it DOES detect in the bios. I have a feeling this is due to bad sectors at the start of the drive.

It's quite hard to say what is exactly wrong with the drive without viewing the drive in person. However, I suggest that you try your luck at getting it to detect in the bios and have another empty HDD plugged in andthen boot to some suitable cloning software which operates in DOS (do not attempt to try & boot to windows!). Perform a reverse clone, with a sector skip for unreadable areas, to get as much of your data as possible.

I hope this helps,
John
Back to top
View user's profile Send private message
elchmaen
Officially active!


Joined: 18 Mar 2008
Posts: 3

PostPosted: Thu Apr 10, 2008 12:03 pm    Post subject: Reply with quote

Thanks for the reply. Maybe one point was not clear enough:
Although the drive is detected by the BIOS there is no way for me accessing it because it starts to click and then the IDE-Bus is blocked.

Is there may be a linux tool (preferably Freeware) that can reset the IDE-Bus so that I can access the drive?

René
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> Hard drives wanted All times are GMT
Goto page 1, 2, 3, 4  Next
Page 1 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.deadharddrive.com topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group