paintstikker Posted once
 
  Joined: 14 Sep 2008 Posts: 1 Location: Wallace, California
  | 
		
			
				 Posted: Sun Sep 14, 2008 1:05 am    Post subject: Need: PCB/WD2000BB-22GUA0 quickly! | 
				     | 
			 
			
				
  | 
			 
			
				I'm in need of the control board for a 200GB Western Digital hard drive, part number: WD2000BB-22GUA0.  I am not sure, but would a PCB with the number 22GUA0 work, considering the firmware may be the only factor in different control boards?  Or maybe a board with WD2000BB followed by anything else for the firmware, if it is somehow possible to install the firmware on it.
 
 
I am hoping to have one by 9/17/08, will work something out.  Contact me at BRaymundo@gmail.com
 
 
Thank you,
 
Brendan | 
			 
		  | 
	
	
		harddrivespecialist Deadharddrive regular +4
 
  Joined: 29 Dec 2007 Posts: 471 Location: Providence, RI. Boston, MA USA
  | 
		
			
				 Posted: Fri Sep 19, 2008 6:46 pm    Post subject:  | 
				     | 
			 
			
				
  | 
			 
			
				There is a little chance to match a board with your drive, unless you will do some modifications to a new board. _________________ www.datarecoveryne.com | 
			 
		  |