www.deadharddrive.com
Deadharddrive forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

WD1600JB-00EVA0 needed please!

 
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> Hard drives wanted
View previous topic :: View next topic  
Author Message
ebondefender
Active contributor


Joined: 14 Jul 2010
Posts: 8
Location: Missouri

PostPosted: Thu Jul 15, 2010 5:27 pm    Post subject: WD1600JB-00EVA0 needed please! Reply with quote

Hello all, I recently repaired one of my hard drive, but the secondary drive is still dead. (Due to the one corner of the PCB being WAY burnt and melted!)
Here are my specs:

Western Digital model no. WD1600JB-00EVA0
Date: May 6, 2004
DCM: HSCHNTJAH
Info on the back of my board's sticker:
2061-001179-000DK XW 1K32 SW12 2 0005440 4445

I greatly appreciate any help! I recently repaired this PC's boot drive which was a Maxtor, but the WD is burnt, stinky plastic toast.
_________________
If hard drives really were hard, they wouldn't break so much.
Back to top
View user's profile Send private message
sunnydreamspace
Deadharddrive regular +5


Joined: 04 Jan 2009
Posts: 540

PostPosted: Thu Jul 15, 2010 8:02 pm    Post subject: Reply with quote

hi,
i have this PCB in stock. please feel free to contact me by email or MSN if need. thanks.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
fzabkar
Deadharddrive regular +3


Joined: 02 Apr 2010
Posts: 210

PostPosted: Fri Jul 16, 2010 7:54 am    Post subject: Re: WD1600JB-00EVA0 needed please! Reply with quote

If you upload a detailed photo, one of us may be able to help you repair your board. Many times the problem is only a shorted diode, in which case it can simply be removed.
Back to top
View user's profile Send private message
harddrivespecialist
Deadharddrive regular +4


Joined: 29 Dec 2007
Posts: 471
Location: Providence, RI. Boston, MA USA

PostPosted: Fri Jul 16, 2010 2:46 pm    Post subject: Re: WD1600JB-00EVA0 needed please! Reply with quote

fzabkar wrote:
Many times the problem is only a shorted diode, in which case it can simply be removed.

This model and WD in general does not commonly suffer from failed diodes, this is not a Seagate.
I don't understand why you are trying to confuse people?
_________________
www.datarecoveryne.com
Back to top
View user's profile Send private message Visit poster's website
ebondefender
Active contributor


Joined: 14 Jul 2010
Posts: 8
Location: Missouri

PostPosted: Fri Jul 16, 2010 5:23 pm    Post subject: Reply with quote

I should be able to upload a detailed photo of mine when I go home from work. (Three day weekend, woot!) This photo isn't mine exactly, but it is very similar to my board. The area circled in red is...

*Mustafa voice from Austin Powers* "Very badly burned!" Sad


_________________
If hard drives really were hard, they wouldn't break so much.
Back to top
View user's profile Send private message
harddrivespecialist
Deadharddrive regular +4


Joined: 29 Dec 2007
Posts: 471
Location: Providence, RI. Boston, MA USA

PostPosted: Fri Jul 16, 2010 8:38 pm    Post subject: Reply with quote

IC chip burned, which is a common problem on that model drive.
_________________
www.datarecoveryne.com
Back to top
View user's profile Send private message Visit poster's website
sunnydreamspace
Deadharddrive regular +5


Joined: 04 Jan 2009
Posts: 540

PostPosted: Fri Jul 16, 2010 11:12 pm    Post subject: Reply with quote

ebondefender wrote:
I should be able to upload a detailed photo of mine when I go home from work. (Three day weekend, woot!) This photo isn't mine exactly, but it is very similar to my board. The area circled in red is...

*Mustafa voice from Austin Powers* "Very badly burned!" Sad


so you'd betters swap PCB. Wink
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Eric Lee
Deadharddrive regular +4


Joined: 26 Apr 2009
Posts: 308
Location: China

PostPosted: Sat Jul 17, 2010 9:32 am    Post subject: Reply with quote

Hi, I have this working PCB too, pls contact my hotmail to see if I can help or not.

Thanks
Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail:eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype:eric.lee1984
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
ebondefender
Active contributor


Joined: 14 Jul 2010
Posts: 8
Location: Missouri

PostPosted: Sat Jul 17, 2010 5:25 pm    Post subject: Reply with quote

Actual photos of mine, just for "fun."



_________________
If hard drives really were hard, they wouldn't break so much.
Back to top
View user's profile Send private message
ebondefender
Active contributor


Joined: 14 Jul 2010
Posts: 8
Location: Missouri

PostPosted: Sat Jul 17, 2010 11:58 pm    Post subject: Reply with quote

Update guys:

I managed to find one here in the US for sale, but I have held out on purchasing it. The WDC control chip on the one I'm looking at on ebay reads "WD70c22 GP ST1.3 " but my drive has a "ST 2.0" chip. Also, the DCM number is different-DSBACVJAA

I'm thinking this would be incompatible, right? I'm probably not going to win that anyway, so I'll keep shopping so to speak. I've already received some nice offers from some of you -thank you by the way. I'm probably going to respond after I figure out which one is exactly compatible. I wouldn't want to swap a U12 Rom chip and screw it up...

Will keep you all posted!
_________________
If hard drives really were hard, they wouldn't break so much.
Back to top
View user's profile Send private message
fzabkar
Deadharddrive regular +3


Joined: 02 Apr 2010
Posts: 210

PostPosted: Sun Jul 18, 2010 3:01 pm    Post subject: Re: WD1600JB-00EVA0 needed please! Reply with quote

[quote="harddrivespecialist"][quote="fzabkar"]Many times the problem is only a shorted diode, in which case it can simply be removed.[/quote]
This model and WD in general does not commonly suffer from failed diodes, this is not a Seagate.
I don't understand why you are trying to confuse people?[/quote]
As you know, I'm not a DR guy, so I am not familiar with all HD models. That said, I have seen plenty of WD's with shorted diodes.

Furthermore, unlike you and your colleagues, I am not camped out on this board with the sole purpose of touting my wares. I see this forum primarily as a helpdesk, rather than a marketplace. Most people asking for replacement boards are not aware that ROM transfers are sometimes required, and that this can often be done by their local TV/AV repair shop. They do not need to send their boards to China for this to be done. In addition, a person asking for a PCB may be doing so even when it is clear to the sellers that the problem is elsewhere. In such cases it would be unconscionable to sell them something that will not help them.

BTW, it makes no sense to say that "WDs in general do not commonly suffer from failed diodes". Protection diodes fail as a consequence of overvoltages. These are external events, not internal. WD users are no less likely to apply overvoltages to their drives as are Seagate users or Hitachi users or Samsung users. Or are you saying that WD drives in general do not have TVS diodes? If so, then you need to elaborate. AIUI, all WD models in recent years are fitted with these diodes.
Back to top
View user's profile Send private message
sunnydreamspace
Deadharddrive regular +5


Joined: 04 Jan 2009
Posts: 540

PostPosted: Sun Jul 18, 2010 11:10 pm    Post subject: Reply with quote

ebondefender wrote:
Update guys:

I managed to find one here in the US for sale, but I have held out on purchasing it. The WDC control chip on the one I'm looking at on ebay reads "WD70c22 GP ST1.3 " but my drive has a "ST 2.0" chip. Also, the DCM number is different-DSBACVJAA

I'm thinking this would be incompatible, right? I'm probably not going to win that anyway, so I'll keep shopping so to speak. I've already received some nice offers from some of you -thank you by the way. I'm probably going to respond after I figure out which one is exactly compatible. I wouldn't want to swap a U12 Rom chip and screw it up...

Will keep you all posted!

for swap this PCB. no need to match
1, chips model
2, DCM
3, you had to swap ROM chip. yeah. we understand may be you don't have experience on soldering operation. you can do it as "Fzabkar" said send it to shop for swap.
don't make it complex. hope my suggestion can help you. good luck!
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> Hard drives wanted All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.deadharddrive.com topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group