www.deadharddrive.com
Deadharddrive forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Data Recovery From BGA Chips & TSOP Chips [re]

 
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> More stories
View previous topic :: View next topic  
Author Message
daniel
Officially active!


Joined: 19 Apr 2010
Posts: 3

PostPosted: Mon Mar 28, 2011 8:19 am    Post subject: Data Recovery From BGA Chips & TSOP Chips [re] Reply with quote

Compared with hard drive data recovery, flash drive data recovery can be mostly more difficult. We know the key factors to consider with a hdd recovery case is the firmware module, the bad sectors, the heads and the platters and while we should consider the page ID, page structure, the channels, the controller type, the data combination algorithm, etc for one flash drive data recovery case especially when we are recovering data from the chips.

Flash memory chips have many types of IC packages and different numbers of pins and flip-flops. BGA(Ball Grid Array) and TSOP(Thin small-outline packages) packages are two popular surface mount chip types among all. BGA uses a grid of solder balls as its connectors and it's famous for its compact size, high lead count and low inductance, which allows lower voltages to be used while TSOP has features of very low-profile about 1mm , tight lead spacing as low as 0.5mm, high pin count and small volume which enables it to be used frequently for RAM or Flash memory ICs.

We can find many flash data recovery software and even freewares to recover data from flash drives if it's just data loss due to accidental deletion, format, clone or some other kind of simple logical causes; Anyway, if it's controller corruption, physical damage to the flash drives, you need to remove the chips from the flash drives, you must have both the desoldering tools and flash data recovery tools and you must have the experience to do all of these. Otherwise you may suffer permanent data loss due to a single damage to the pins or solder balls.

For flash data recovery hardware solution, we have found three choices in the market right now: Soft Center Russia, ACE Russia and SalvationDATA China. SalvationDATA recently announced its newly manufactured BGA chip socket for 12*17, 13*17 and 14*18 which enables its existing SD flash doctor make a faster pace to better support both TSOP and BGA chips.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> More stories All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.deadharddrive.com topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group